Esta página aún no está traducida; se muestra en inglés.
Program with CPS
Open CPS in the header. Editing files works locally; reading or writing the radio requires a browser with serial-port support and the programming cable. Start the radio normally with DM32+ running.
Read, edit, and write
- Choose Connect and select the cable's port. The connection bar identifies the radio.
- Choose Read from Radio before editing an existing configuration.
- Save a file copy. Edit the appropriate tabs and review Problems.
- Choose Write to Radio. Check the target radio and the changes shown before starting the write.
- Wait for verification. Keep the radio powered and connected until it finishes.
A large DMR ID database can take a long time over the programming cable. If CPS offers to skip reading it, the later codeplug write preserves the database already on the radio. Use the DMR ID Database tab to read or replace it separately.
If the first write offers Prepare Radio, read its explanation and keep the backup. Stock data may occupy the area the firmware needs for its settings. Preparation is separate from ordinary codeplug editing.
Editor tabs
| Tab | Use |
|---|---|
| Radio | DMR ID, radio name, boot text, and call hang times |
| Encryption | Persistent AES key slots and the radio default on a compatible connected radio |
| Channels | FM/DMR frequencies, power, tones, timeslot, color code, contacts, and channel options |
| Zones | Channel collections and their order |
| Contacts | Saved group and private-call destinations |
| RX Group Lists | Additional talkgroups a DMR channel receives |
| DTMF Contacts | Stored tone sequences |
| APRS | Codeplug APRS configurations |
| DMR ID Database | Caller names associated with DMR IDs |
| Problems | Errors that block writing and warnings that need review |
The Convert Operating Talkgroups action derives shared operating talkgroups from channel contacts and receive groups. Review the conversion before accepting it. Shared talkgroups need firmware and editors that preserve this extension.
Files and drafts
New starts a codeplug. Open File identifies supported images and imports. Save offers the supported file formats, including the codeplug image, CSV, and qdmr YAML. Review import warnings: formats can differ in capacity and supported fields.
CPS keeps a working draft in this browser. A restored-draft notice identifies it when you return. Download a file for a durable backup; a browser draft can disappear when browser storage is cleared. Use Undo and Redo while editing.
Encryption slots
AES key values are written through the live radio connection. They are excluded from codeplug exports, saved drafts, and ordinary reports. Keep your own secure record of keys you need to restore. Selecting a slot does not recover its secret value. Check the radio default and each channel's encryption assignment before writing.
Connection ownership and privacy
Only one application can use the programming cable at a time. Disconnect CPS before opening the installer or a host program. Codeplug conversion runs locally. RadioID lookups require internet access and send an API key to RadioID only when you use that service. Error reports include a codeplug only when you choose to attach one.
P25 programming
The editor offers P25 and P25 Trunking channel modes for Phase 1. Conventional channels have RX/TX NAC and squelch fields. Use Systems to enter trunked-system identity, control channels, optional sites and channel plans. Select that system on each trunked channel. The current firmware supports eight systems. Phase 2 voice is not supported.
RX Only remains the channel transmit permission. On a trunked channel it also prevents registration, affiliation and service requests. New trunked channels start RX only, and new systems start Never (listen only). To transmit, the channel and its system must both permit it, and all normal frequency and transmit checks still apply. Listen-only systems never send automatic signaling. The Radio tab has a P25 unit ID; blank inherits the DMR ID. A system may override that ID.
Save P25 codeplugs as binary backups. Channel CSV and qdmr YAML cannot represent the permission and system records; the editor refuses these operations while those records are present. Other CSV tables remain usable. Existing inline DMR talkgroup assignments are migrated to the shared pool when P25 is first saved. Unknown occupied storage or insufficient capacity is reported instead of overwritten. Keep the original backup.
Writing P25 requires firmware advertising managed staged programming in fast-protocol INFO. Older firmware is refused before a write; there is no legacy-write fallback. The radio stops active calls before the commit and reloads the resulting permissions before resuming. Keep radio identity also preserves the radio-wide P25 unit ID. This path is verified with synthetic flash and host simulations; radio interoperability remains untested.
If CPS reports that managed P25 transfers are unavailable after an update, disconnect and reconnect to refresh the capability check. The initial 1.1.0 RC builds omitted the required board staging reserve; those builds need a corrected firmware image even though they display the P25 modes. Save the edited codeplug as a binary file before updating the firmware.